A new triterpenoid from the fruits of Gardenia jasminoides var. radicans Makino

A novel triterpenoid 3α,16β,23,24-tetrahydroxy-28-nor-ursane-12,17,19,21-tetraen (1) was isolated from the fruits of Gardenia jasminoides var. radicans Makino. The structure of the new compounds was elucidated on the basis of spectroscopic analysis including MS and NMR data. Compound 1 was in vitro tested for cytostatic activity on human throat cancer (Hep-2) cell line by 3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyltetrazolium bromide method and showed mild anticancer activity with the IC₅₀ of 31.2 μM.     

A new naphthoquinone and other antibacterial constituents from the roots of Xanthium sibiricum

Reinvestigating the chemical constituents of the roots of Xanthium sibiricum led to the isolation of a new naphthoquinone (1), together with 13 known compounds (2–14). Their structures were elucidated by using spectroscopic analyses, including HR-ESI-MS, 1D and 2D NMR, and by comparing their NMR data with those of related compounds. Compound 1 showed moderate antibacterial activity against Escherichia coli, Bacillus subtilis, Micrococcus tetragenus and Staphylococcus aureus, while 6 and 12 showed stronger antibacterial activity than the positive control ciprofloxacin against E. coli, with minimum inhibitory concentration values of 0.17 and 0.35 μg/mL, respectively.     

Synthesis and antifungal activity of chalcone derivatives

In the present study, using chalcone as a lead compound, a series of its derivatives (compounds 1–30) were designed and synthesised. Their activity of anti-pathogenic fungi of plants has been evaluated. It is found that these compounds have good antifungal activity against Sclerotinia sclerotiorum, Helminthosprium maydis, Botrytis cinerea, Rhizoctonia solani and Gibberella zeae. Among them, the inhibition of growth for compound 30 against S. sclerotiorum showed 89.9%, with the median effective concentrations (EC₅₀) of 15.4 μg mL^? 1. The inhibition of growth for compounds 28, 29 and 30 at a concentration of 100 μg mL^? 1 against H. maydis is 90.3%, 90.7% and 91.1%, with EC₅₀ of 15.1, 18.3 and 18.1μg mL^? 1, respectively.     

Ionic‐liquid‐based,manual‐shaking‐ and ultrasound‐assisted,surfactant‐enhanced emulsification microextraction for the determination of three fungicide residues in juice samples

A novel manual‐shaking‐ and ultrasound‐assisted surfactant‐enhanced emulsification microextraction method was developed for the determination of three fungicides in juice samples. In this method, the ionic liquid, 1‐ethyl‐3‐methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, instead of a volatile organic solvent was used as the extraction solvent. The surfactant, NP‐10, was used as an emulsifier to enhance the dispersion of the water‐immiscible ionic liquid into an aqueous phase, which accelerated the mass transfer of the analytes. Organic dispersive solvent typically required in common dispersive liquid–liquid microextraction methods was not necessary. In addition, manual shaking for 15 s before ultrasound to preliminarily mix the extraction solvent and the aqueous sample could greatly shorten the time for dispersing the ionic liquid into aqueous solution by ultrasound irradiation. Several experimental parameters affecting the extraction efficiency, including type and volume of extraction solvent, type and concentration of surfactant, extraction time, and pH, were optimized. Under the optimized conditions, good linearity with the correlation coefficients (γ) higher than 0.9986 and high sensitivity with the limit of detection ranging from 0.4 to 1.6 μg/L were obtained. The average recoveries ranged from 61.4 to 86.0% for spiked juice, with relative standard deviations from 1.8 to 9.7%. The proposed method was demonstrated to be a simple, fast, and efficient method for the analysis of the target fungicides in juice samples.     

A new flavonoid from Cudrania cochinchinensis

Chemical investigation of the ethanol extract of the roots of Cudrania cochinchinensis led to the isolation of a new flavonoid, (6S,12S,13R)-1-methoxy cyanomaclurin (1), together with seven known compounds, 1,3,5-trihydroxy-4-(3′-hydroxy-3′-methylbutyl)xanthone (2), 1,3,6-trihydroxy-4-prenylxanthone (3), 1,3,6,7-tetrahydroxyxanthone (4), 1,3,5,6-tetrahydroxyxanthone (5), 1,3,6-trihydroxy-5-methoxyxanthone (6), resveratrol (7) and oxyresveratrol (8). The structure of compound 1 was elucidated on the basis of 1D and 2D NMR spectra and the HR-ESI-MS data. The absolute stereochemistry was deduced via Rh₂(OCOCF₃)₄-induced CD and NOESY spectra.     

Molecularly imprinted polymers with synthetic dummy templates for the preparation of capsaicin and dihydrocapsaicin from chili peppers

In this work, dummy molecularly imprinted polymers with high selectivity and affinity to capsaicin and dihydrocapsaicin are designed using N‐vanillylnonanamide as a dummy template. The performance of dummy molecularly imprinted polymers and nonimprinted polymers was evaluated using adsorption isotherms, adsorption kinetics, and selective recognition capacity. Dummy molecularly imprinted polymers were found to exhibit good site accessibility, taking just 20 min to achieve adsorption equilibrium; they were also highly selective toward capsaicin and dihydrocapsaicin. We successfully used dummy molecularly imprinted polymers as a specific sorbent for selectively enriching capsaicin and dihydrocapsaicin from chili pepper samples. In a scaled‐up experiment, the selective recovery of capsaicinoids was calculated to be 77.8% using solid‐phase extraction. To the best of our knowledge, this is the first example of the use of N‐vanillylnonanamide as a dummy template in molecularly imprinted polymers to simultaneously enrich capsaicin and dihydrocapsaicin.     

Separation and purification of five alkaloids from Aconitum duclouxii by counter‐current chromatography

C₁₉‐diterpenoid alkaloids are the main components of Aconitum duclouxii Levl. The process of separation and purification of these compounds in previous studies was tedious and time consuming, requiring multiple chromatographic steps, thus resulted in low recovery and high cost. In the present work, five C₁₉‐diterpenoid alkaloids, namely, benzoylaconine ( 1 ), N‐deethylaconitine ( 2 ), aconitine ( 3 ), deoxyaconitine ( 4 ), and ducloudine A ( 5 ), were efficiently prepared from A. duclouxii Levl (Aconitum L.) by ethyl acetate extraction followed with counter‐current chromatography. In the process of separation, the critical conditions of counter‐current chromatography were optimized. The two‐phase solvent system composed of n‐hexane/ethyl acetate/methanol/water/NH₃·H₂O (25%) (1:1:1:1:0.1, v/v) was selected and 148.2 mg of 1 , 24.1 mg of 2 , 250.6 mg of 3 , 73.9 mg of 4, and 31.4 mg of 5 were obtained from 1 g total Aconitum alkaloids extract, respectively, in a single run within 4 h. Their purities were found to be 98.4, 97.2, 98.2, 96.8, and 96.6%, respectively, by ultra‐high performance liquid chromatography analysis. The presented separation and purification method was simple, fast, and efficient, and the obtained highly pure alkaloids are suitable for biochemical and toxicological investigation.     

Development of a method to screen and isolate potential α‐glucosidase inhibitors from Panax japonicus C.A. Meyer by ultrafiltration,liquid chromatography,and counter‐current chromatography

A new assay based on ultrafiltration, liquid chromatography and mass spectrometry was developed for the rapid screening and identification of the ligands for α‐glucosidase from the extract of Panax japonicus. Six saponins were identified as α‐glucosidase inhibitors. Subsequently, the specific binding ligands, namely, notoginsenoside R₁, ginsenoside Rb₁, chikusetsusaponin V, chikusetsusaponin IV, chikusetsusaponin IVa, and ginsenoside Rd (the purities were 94.18, 95.43, 96.09, 93.26, 94.50, 93.86%, respectively) were separated by counter‐current chromatography using two‐phase solvent systems composed of tert‐butyl methyl ether, acetonitrile, 0.1% aqueous formic acid (3.8:1.0:4.4, v/v/v) and the solvent system composed of methylene chloride, isopropanol, methanol, 0.1% aqueous formic acid (5.8:1.0:6.0:2.2, v/v/v). The results demonstrate that ultrafiltration, liquid chromatography and mass spectrometry combined with high‐speed counter‐current chromatography might provide not only a powerful tool for screening and isolating α‐glucosidase inhibitors in complex samples but also a useful platform for discovering bioactive compounds for the prevention and treatment of diabetes mellitus.     

Determination of diflubenzuron and chlorbenzuron in fruits by combining acetonitrile‐based extraction with dispersive liquid–liquid microextraction followed by high‐performance liquid chromatography

In this study, a simple and low‐organic‐solvent‐consuming method combining an acetonitrile‐partitioning extraction procedure followed by “quick, easy, cheap, effective, rugged and safe” cleanup with ionic‐liquid‐based dispersive liquid–liquid microextraction and high‐performance liquid chromatography with diode array detection was developed for the determination of diflubenzuron and chlorbenzuron in grapes and pears. Ionic‐liquid‐based dispersive liquid–liquid microextraction was performed using the ionic liquid 1‐hexyl‐3‐methylimidazolium hexafluorophosphate as the extractive solvent and acetonitrile extract as the dispersive solvent. The main factors influencing the efficiency of the dispersive liquid–liquid microextraction were evaluated, including the extractive solvent type and volume and the dispersive solvent volume. The validation parameters indicated the suitability of the method for routine analyses of benzoylurea insecticides in a large number of samples. The relative recoveries at three spiked levels ranged between 98.6 and 109.3% with relative standard deviations of less than 5.2%. The limit of detection was 0.005 mg/kg for the two insecticides. The proposed method was successfully used for the rapid determination of diflubenzuron and chlorbenzuron residues in real fruit samples.     

Theoretical and experimental research on the self‐assembled system of molecularly imprinted polymers formed by salbutamol and methacrylic acid

The quantum chemical method was applied for screening functional monomers in the rational design of salbutamol‐imprinted polymers. Salbutamol was the template molecule, and methacrylic acid was the single functional monomer. The LC‐WPBE/6–31G(d,p) method was used to investigate the geometry optimization, active sites, natural bond orbital charges, binding energies of the imprinted molecule, and solvation energy. The mechanism of action between salbutamol and methacrylic acid was also discussed. The theoretical results show that salbutamol interacts with functional monomers by hydrogen bonds, and the salbutamol‐imprinted polymers with a ratio of 1:4 (salbutamol/methacrylic acid) in acetonitrile had the highest stability. The salbutamol‐imprinted polymers were prepared by precipitation polymerization. The experimental results indicated that the maximum adsorption capacity for salbutamol toward molecularly imprinted polymers was 7.33 mg/g, and the molecularly imprinted polymers had a higher selectivity for salbutamol than for norepinephrine and terbutaline sulfate. Herein, the studies can provide theoretical and experimental references for the salbutamol molecular imprinted system.